Based in Traînel, in the Aube region, TCM SOLUTIONS designs and builds machines for producing cardboard tubes and angle boards, from the unwinder to the palletiser. A profile of a French manufacturer that will exhibit at ALLFORPACK EMBALLAGE PARIS in 2027.
Published on Nov 12,2026 at 9:00 AM | Updated on Nov 18,2026 at 2:47 PM

TCM SOLUTIONS designs the machines that make cardboard tubes and angle boards. Based in Traînel, in the Aube region, the manufacturer offers complete lines or standalone machines to be integrated into an existing line. It will exhibit at ALLFORPACK EMBALLAGE PARIS in 2027.

An engineering team based in the Aube region

TCM SOLUTIONS was founded in 2015. The company brings together a team of 40 people with 25 years of combined experience in designing special machines, according to its company presentation. The design office draws up each machine based on the customer's specifications and user safety requirements. The machines are assembled and tested before shipment. Teams then install them and train operators in their use and in safety.

The range covers every stage of production, with unwinders, gluers, spiral winders, profilers, tube cutters, angle board cutters and palletisers. A manufacturer can order an entire line or a single machine to upgrade a specific workstation.

Spiral tubes from 10 to 1,600 mm in diameter

The tube machines produce spiral tubes from 10 mm inside diameter up to 1,600 mm outside diameter, with wall thicknesses from 1 to 25 mm. The line starts with the unwinder, which unwinds up to 35 strips of lightweight board or paper. It splices reels automatically so that production runs without stopping, at running speeds of up to 150 m/min.

The gluer adjusts the tension and glue quantity of each strip separately. It applies glue to one side only to limit moisture in the tube, and its motorised settings shorten production changeovers. The spiral winder has up to four motorised heads. Its belt drive synchronises rotation speeds and eliminates strip slippage, at up to 140 m/min.

The in-line tube cutters come in two versions. The single-knife model cuts long lengths and the multi-knife model short ones, with an accuracy of ±0.2 mm. For producing rings, the recutter works to ±0.05 mm, in line or off line.

Angle boards and profiles, from cardboard plies to notching

The company's second speciality, the cardboard angle board line forms and glues up to 20 plies at high speed, for legs of up to 100 mm and a maximum thickness of 12 mm. Forming is adjusted without tools, which reduces downtime between two runs. Traction is driven by four independent brushless motors. It maintains constant grip without marking the board, even with fragile liner papers.

The angle board cutter reaches 300 cuts per minute. An optional in-line notching station makes it possible to produce customised angle boards with notches, holes or pre-cuts. The ER1 recutter processes angle boards with legs of 25 to 100 mm off line, thanks to two independent cutting and notching stations.

TCM SOLUTIONS machine for manufacturing cardboard tubes and angle boards

Palletising long, bulky products

At the end of the line, handling tubes and angle boards requires considerable physical effort from operators and often limits the throughput of the entire line. TCM SOLUTIONS has developed several ranges of palletisers to address this. The automatic and semi-automatic models handle tubes up to 11 m long. A compact version suits workshops where space is tight, and a high-speed palletiser handles short tubes produced at high speed. The Robopal palletises tubes from 200 to 650 mm in diameter vertically. For angle boards, the palletisers accept lengths of up to 6 m.

The pallet handling systems round out this offer. The dispenser prepares up to 12 pallets in advance and places the slip sheets. The dispensing robot manages 11 pallet formats, at a rate of up to 6 pallets per minute. This equipment is in line with the trends described in the articles on end-of-line automation and robotic palletising.

Maintenance, audits and custom machines

TCM SOLUTIONS' services cover preventive maintenance, troubleshooting, electronic upgrades and mechanical refurbishment of machines already in service. Its technicians work worldwide. The company also carries out audits to improve throughput, quality, ergonomics, plant layout and scrap reduction. For a building with pillars, a particular web width or a specific function, the design office develops custom machines.

This ability to modernise an existing fleet is of interest to tube and angle board manufacturers, who process a material widely used in packaging. Regulation (EU) 2025/40 covers all packaging, whatever its material, including industrial packaging. The French Directorate General of Customs points out that its first obligations have applied since 12 August 2026. It also states that 50% of the paper used in Europe goes into packaging. The effects of this regulation on processing and packing lines are covered in a dedicated article.

TCM SOLUTIONS at ALLFORPACK EMBALLAGE PARIS 2027

ALLFORPACK EMBALLAGE PARIS will take place from Tuesday 29 June to Thursday 1 July 2027 at Paris Expo Porte de Versailles. TCM SOLUTIONS will present its machines for angle boards and profiles, its tube solutions, its palletisers and its pallet handling systems, as well as its service offering, from design studies to maintenance.

The show brings together the Packaging and Materials, Processing and Packing, Intralogistics and Transport, and Design and Printing sectors, as well as the Re-Generation area dedicated to responsible packaging. Manufacturers of cores, tubes and angle boards will be able to meet the company's design office there to study a new line or the modernisation of equipment already in place.